WAM® SiC 75 HS M – Silicon Carbide Based Heat Set Dry Mortar

WAM® SiC 75 HS M is a special purpose heat set mortar.  It is composed primarily of a silicon carbide based aggregate. This allows the material to be suitable for use up to 2500oF in oxidizing atmospheres and 3200oF in reducing atmospheres.

WAM® SiC 75 HS M finds application as a bonding mortar for brick or precast shapes of similar mineralogy.

Typical Technical Data
WAM® SiC 75 HS M                                                                               
PDF Download

Classification:Heat Set Mortar
Placement Method:Troweling or Dipping
Typical Water Requirement (%wt): 
Troweling (may be adjusted)
Dipping (may be adjusted)
20
25
Pyrometric Cone Equivalent (P.C.E.)Cone 14/34*
Maximum Recommended Service Temperature (°F):2500/3200*
Screen Sizing (% passing 48 Mesh):+95
*oxidizing/reducing

CHEMICAL ANALYSIS
Calculated wt.% Based on Common Oxides

Aluminum Oxide (Al2O3):14.1 %
Silicon Dioxide (SiO2):19.3 %
Titanium Dioxide (TiO2):0.6 %
Iron(III) Oxide (Fe2O3):0.3 %
Calcium Oxide (CaO):<0.1 %
Magnesium Oxide (MgO):<0.1 %
Combined Alkali Oxide (Na2O + K2O):0.2 %
Silicon Carbide (SiC):65.4 %

Additional technical data may be available. Please contact your sales representative for more information.
Data on this table represent typical properties and cannot be used for specification purposes.